Communications

Quantum Node Pro3 communications with local or remote PCs, servers or software, cn bem ade by two diferente ways

  1. Ethernet
  2. GPRS

 

Ethernet

To configure Quantum Node Pro3 using your PC, both must be in the same network and IP range, as shown in following image.

CLEAN_M2MGATEWAY_CONNECT_TO_PC

As long as local network has connection to the internet, Quantum Node Pro3 will also be able to communicate through the internet.

 

Pinout

The Ethernet connection provides a full-duplex 10/100Tx connection to local and remote locations.

ETHERNET_PINOUT
ETHERNET_PINOUT_TABLE

GPRS

Using a standard SIM card, Quantum Node Pro3 and Quantum Extender can communicate with PC, Servers and software.

Pre-requisites of SIM Card

  • SIM card with standard size;
  • PIN code disabled;
  • APN (depending of the operator or plan, may be necessary user rand password).

 

Inserting SIM card

The SIM card must be inserted into the slot for that purpose, located in the upper part of Quantum Node Pro3, located next to the GPRS antenna.

The card must be inserted with the chip facing backward and with its clipped edge to the left.

 

The following image shows how to insert the SIM card.

GATEWAY GPRS - CARTÃO

Share