Refrigerator Monitoring and Alerts (Hands-on)

“Refrigerator Monitoring and Alerts”

How many times the refrigerator door got barely closed and you only realized that when you got back later and everything was already melted?

Well, now you can avoid this to happen by implementing your own alert project…Let’s get started!

Get the Tool Source CodeCheck how easy is to create an application with our SDK:

What you will be able to do

In this project you will be able to:

  • Create a system for monitoring temperatures and door openings, log recording and alarms;
  • Watch in real time, from one (1) to three (3) temperatures and open/close door contacts;
  • Define alarm triggers;
  • Receive dashboard, email and sound notifications;
  • Request logs.

And you will also be able to:

  • Explore Code Examples
  • Integrate with your Software

You will learn how to

  • Power on the M2M Gateway;
  • Connect temperature sensor;
  • Connect door contact;
  • Connect buzzer;
  • Use M2M Gateway log;
  • Use M2M Gateway user programming;

What you will need

Hardware

The “Make Pack” consists of the following material:

Domatica-M2M-Gateway-e1440099526940-320x240
1 x M2M Gateway
PowerSupply_dr-15-24_02-220x165
1 x Power Supply 24VDCs
Temperature-Sensor_01-220x165
1 x Temperature Sensor
Door-Contact-220x165
1 x Door Contact
Buzzer_02-220x165
1 x Buzzer
Red-Black-Wires-220x165
1 x Red WWire / 1 x Black Wire
PowerSupply-Cable2-220x165
1 x Power Supply Cable

 

Acquire the “Make Pack” at the Online Store on the following link: Make Pack

Note: This purchase is limited to one unit per person or company.

Get Started!

1. Wiring

Learn in detail about the installation process on the following link: Install devices and sensors

[youtube https://www.youtube.com/watch?v=LxexR7TR370&w=560&h=315]

2. Refrigerator Monitoring and Alerts Tool

2.1.1. Download Tool

Download and execute the Refrigerator Monitoring and Alerts Tool by clicking here.

2.1.2. Get the Tool Source Code

Check how easy is to create an application with our SDK:
2.2. 
Make Tutorial

The Make Tutorial will help you to setup and monitor your project on the Monitoring and Alerts Tool.

Learn about Wizard General Settings and Refrigerator Monitor and Alerts Tool  here

2.3. Explore Code Examples

code1.jpg

Learn how to customize the Tool to your needs on the following link: Explore Code Examples

3. Integrate your Application

3. 1. Setup your development environment

To learn how to setup your development environment and establish your application’s first connection to the M2M Gateway modules, please download the Hello iDomSDK pack from Domatica Support Center.

Link to download the Hello iDomSDK pack:

Download

3.2. Check our Project Samples

To learn how to remotely monitor and control through the iDomFramework try our Project Samples from Domatica Support Center.

Link to download the Project Samples:

Download

3.3. SDK API

To learn the full SDK API or how to integrate the iDomFramework please check the Documentation and Guides from Domatica Support Center.

Link to download Documentation and Guides:

Download

Have Questions?

Leave a Reply