Add Modbus Devices

Select the Branch you want to configure and add a new device by clicking the “Add” button on the right side of the Tool.

Then, select the Modbus device you want to add and and click “Add” button.

TOOL_ADD_MODBUS_DEVICE

In the next window, name the Modbus Device and check the Modbus settings. These must coincide with the settings in the Modbus equipment.

TOOL_MODBUS_DEVICE_SETTINGS

If you are using a Modbus TCP/IP equipment, change the communication channel to TCP and check the TCP settings.

TOOL_MODBUS_TCP_DEVICE_SETTINGS

Enable or disable the registers on the list, by clicking the “Enable” checkbox.

 

TOOL_MODBUS_REGISTER_LIST

Click “Ok” and you have created your Modbus device.

Share